HMC1395 CNC Horizontal Machining Center

1.X, Y, Z dauki nauyi-load nadi mikakke jagora hanyoyin, inganta inji ta rigidity;

2.Amfani da ci-gaba na kasa da kasa high-gudun shiru gubar dunƙule inganta matsayi daidaito na inji kayan aiki.

3.60m/min saurin ciyarwar abinci yana rage lokacin injina kuma yana haɓaka aikin injin;

4.The inji kayan aiki rungumi dabi'ar T-dimbin yawa gado gado, da kuma tsarin ne mafi m ta hanyar iyaka kashi bincike a cikin zane tsari;

5.tare da ci-gaba Fanuc 0i MF ko tsarin Siemens; babban kwanciyar hankali, saurin sauri;

6.The B-axis servo motor yana tafiyar da tebur don juyawa ta hanyar raguwar kayan tsutsa.

7.Rotary tebur tare da atomatik indexing aiki, hakori farantin sakawa da high matsayi daidaito.

8.Spindle rungumi dabi'ar kai tsaye drive spindle, high gudun, babu vibration, high aiki daidaito

9.The headstock lift rungumi dabi'ar nitrogen-na'ura mai aiki da karfin ruwa balance Silinda, wanda kara habaka da dagawa amsa gudun;

10.The inji kayan aiki yana sanye take da wani shãfe haske na dogo kariya murfin, da kuma X da Y ma'aunin kariyar murfin yana ɗaukar nauyin kariya na nau'in bango mai mahimmanci, wanda ke inganta matakin kariya na kayan aikin na'ura, yadda ya kamata ya kare jagorar jagorar da kuma kullun gubar. , kuma yana tsawaita rayuwar sabis;

11.The inji kayan aiki rungumi dabi'ar cikakken rufe waje kariya don hana spatter na yankan ruwa a lokacin da sauri machining.

12.The tsarin aiki yana ƙasa, wanda ya dace da masu amfani don yin aiki kuma yana kare lafiyar mai aiki sosai.

13.Sashin gaban na'ura yana sanye da ƙofar da ke da babban buɗewa don sauƙaƙe mai aiki don canza aikin aiki.

14.The inji sanye take da Taiwan sanannen iri kayan aiki mujallar, 40pcs kayan aiki mujallar, ATC.

15.The inji kayan aiki sanye take da atomatik lubrication tsarin.PLC mai zaman kanta ne ke sarrafa shi kuma yana rarraba mai ta atomatik bisa ga nisan aiki, wanda ke rage ɓarnawar mai sosai kuma yana guje wa raguwar rayuwar dalma da jagorar layi saboda rashin mai.

16.Akwai na'urar cire guntu ta atomatik a tsakiyar gadon injin.Mai ɗaukar guntu farantin sarkar yana fitar da guntun ƙarfe a ƙarƙashin mashin ɗin zuwa mai ɗaukar guntu nau'in sarkar a bayan gado.Bayan an ɗaga nau'in nau'in guntu guntu na sarkar, ana tattara guntuwar baƙin ƙarfe a cikin tarin guntu A cikin motar, ana ɗaukar ragowar zafin da ke kan filayen ƙarfe da sauri, kuma daidaiton kayan aikin injin ya fi kwanciyar hankali.

17.The raya jagorar dogo na gado yana tako, tare da ƙananan gaba da babban baya, da kuma babban bambanci mai tsayi, wanda ba zai iya rage nauyin sassa masu motsi ba (ginshiƙai) da kuma inganta saurin amsawa na kayan aikin inji. , amma kuma yana kashe lokacin jujjuya baya na kayan aikin injin yayin yankewa da haɓaka kwanciyar hankali na injin.