Bench Lathe Machine C0636A
Siffofin
Hanyar jagora da duk gears a cikin hannun jari suna taurare kuma daidaitaccen ƙasa.
Tsarin spindle yana da tsayin daka da daidaito.
Injin ɗin suna da ƙaƙƙarfan jirgin ƙasa na kaya mai ƙarfi, daidaitaccen jujjuyawar juyi da gudu mai santsi tare da ƙaramar amo.
Ana samar da na'urar aminci da yawa akan alfarwar.
Fedal ko na'urar birki ta lantarki.
Takaddun gwajin haƙuri, an haɗa ginshiƙi na gwaji
1. Madaidaicin ƙasa taurare hanyoyin gado
2. Ana goyan bayan sandal ɗin buri daidai gwargwado
3. Kayan kayan kwalliya an yi su da ƙarfe mai inganci, ƙasa da tauri
4. Ana ba da rata mai cirewa don aikin diamita mafi girma
5. Sauƙaƙe masu saurin canjin aiki
6. Kewayon saurin Spindle 70 ~ 2000r / min
7. Akwai gadaje masu tsayi daban-daban guda biyu
8. Akwatin kayan aiki mai sauƙi yana da abinci daban-daban da aikin yankan zaren
9. D1-4 camlock spindle hanci
Ƙayyadaddun bayanai
| MISALI | C0636A |
| Juyawa saman gado | 360mm (14") |
| Yin lilo a kan giciye | 224mm (8-13/16") |
| Swing a diamita tata | 502mm (19-3/4) |
| Swing a tsayi | 210mm (8-1/4) |
| Tsawon tsakiya | 179mm(7)) |
| Nisa tsakanin tsakiya | 750mm(30")/1000mm(40") |
| Fadin gado | 187mm (7-3/8) |
| Tsawon gado | 1405mm (55-5/16") |
| Tsawon gado | 290mm (11-13/32") |
| Ƙunƙarar leda | 38mm (1-1/2) |
| Leda hanci | D1-4" |
| Tafi cikin hanci | MT NO.5 |
| Tafi a hannun riga | MT NO.3 |
| Lambar sauri | 8 |
| Matsakaicin saurin igiya | 70-2000 r/min |
| Ketare fadin nunin faifai | 130mm (5-3/32 ″) |
| Ketare tafiya ta zamewa | 170mm (6-11/16") |
| Faɗin sauran mahaɗin | 80mm (3-1/8 ″) |
| Hadarin hutu tafiya | 95mm (3-9/16") |
| Diamita dunƙule gubar | 22mm (7/8 ″) |
| Zaren dunƙule gubar | 8T.PI ko 3mm |
| Diamita na sandar ciyarwa | 19mm (3/4) |
| Yankan kayan aiki max sashe | 16mm × 16mm(5/8"×5/8") |
| Zare filayen sarauta | 34 Lambobi 4-56 TPI |
| Zaren ma'aunin awo | 26 Lambobin 0.4-7 MP |
| Dogon ciyarwar daular | 32 Lambobi.0.002-0.548"/Rev |
| Ma'aunin ciyarwar mai tsayi | 32 Lambobi.0.052-0.392mm/Rev |
| Giciye yana ciyar da sarki | 32 Lambobi.0.007-0.0187"/Rev |
| Ƙimar ciyarwar giciye | 32 Lambobi.0.014-0.380mm/Rev |
| Diamita na Quill | 32mm (1-1/4) |
| Tafiyar qull | 100mm (3-15/16") |
| Tafarnuwa | MT NO.3 |
| Don babban motar | 2HP, 3PH ko 2PH, 1PH |
